dBm-zu-Watt Umrechnung
HF-Leistungsumrechnung in beide Richtungen
Required Parameters
Waiting for input data...
Quick Answer
dBm is an absolute power measurement referenced to 1 milliwatt (mW). 0 dBm = 1 mW. Every 3 dB increase doubles the power; a 10 dB increase multiplies power by 10.
dBm-zu-Watt-Umrechner
Konvertieren Sie zwischen dBm und Watt fuer HF-Leistungsmessungen.
Formeln
P(mW) = 10^(dBm/10)
dBm = 10 x log10(P/1mW)
Verwandte Werkzeuge
- Daempfungsglied-Rechner
- Frequenz-zu-Wellenlaenge-Rechner
Design Notes
Using dBm makes calculating signal chains incredibly simple by substituting multiplication/division with addition/subtraction. For example, if you output +10 dBm, pass it through a -3 dB attenuator, and add a +15 dB amplifier, the output is simply 10 - 3 + 15 = +22 dBm. Note that in 50Ω systems, 0 dBm corresponds to ~223.6 mV(RMS).
Common Mistakes
- 1
Confusing dBm (absolute power) with dB (relative ratio). You can add dB to dBm, but adding dBm to dBm is mathematically invalid.
- 2
Forgetting that negative dBm still represents positive Watts (e.g., -30 dBm is 1 microwatt, not 'negative power').
- 3
Assuming the calculation depends on impedance. Power to dBm conversion is pure power mapping independent of impedance, though converting it safely to Voltage requires knowing Z0.
Engineering Handbox
1. Use formula: P(W) = 10^(dBm / 10) / 1000 2. 10^(30/10) = 10³ = 1000 3. 1000 / 1000 = 1 Watt
Knowledge Base
Was ist dBm?
Absolute Leistungsangabe in Dezibel bezogen auf 1 Milliwatt. 0 dBm = 1 mW. Jede 3 dB verdoppeln die Leistung, 10 dB verzehnfachen sie.
Wie rechne ich dBm in Watt um?
P(W) = 10^(dBm/10) / 1000. Beispiel: 30 dBm = 10³ mW = 1 Watt.
Was ist der Unterschied zwischen dBm und dB?
dBm ist ein absoluter Leistungspegel (bezogen auf 1 mW). dB ist ein relatives Verhältnis. Man addiert dB zu dBm, aber nie dBm zu dBm.
Welche dBm-Werte sollte ich kennen?
0 dBm = 1 mW, +10 = 10 mW, +20 = 100 mW, +30 = 1 W. Negativ: -10 = 0,1 mW, -30 = 1 µW, -60 = 1 nW.
Wie rechne ich dBm in Spannung um?
V(RMS) = √(P × Z). Bei 50Ω: 0 dBm = 223,6 mV RMS, +10 dBm = 707,1 mV RMS.