Calculadora de Potência Trifásica

Potência ativa, aparente e reativa

Required Parameters

V
A

Waiting for input data...

Ad Placement
Sidebar Adaptive Ad Slot

Quick Answer

Total Real Power (W) in a balanced 3-phase system is P = √3 × Line Voltage × Line Current × Power Factor.

Documentation

Calculadora de Potencia Trifasica

Calcule tensao de linha, tensao de fase, corrente de linha, corrente de fase e potencia em sistemas trifasicos.

Conexao Estrela (Y)

  • Vlinha = sqrt(3) x Vfase
  • Ilinha = Ifase

Conexao Triangulo (Delta)

  • Vlinha = Vfase
  • Ilinha = sqrt(3) x Ifase

Ferramentas Relacionadas

  • Calculadora da Lei de Ohm
  • Calculadora de Bitola de Fio

Design Notes

Three-phase systems are standard in industrial motor drives and high-power distribution because they provide constant power transfer (zero torque ripple on motors) and require less copper wire than equivalent single-phase systems. When switching between Wye (Star) and Delta configurations, remember that in Wye, Line Current = Phase Current but Line Voltage = √3 × Phase Voltage. In Delta, it's reversed. Always ensure your power factor (PF) is as close to 1.0 as possible to minimize reactive power losses.

Common Mistakes

  • 1

    Using Phase Voltage instead of Line-to-Line Voltage when applying the √3 factor.

  • 2

    Forgetting to multiply by the Power Factor, yielding Apparent Power (VA) instead of True Power (Watts).

  • 3

    Assuming an unbalanced load calculation can use this simple balanced formula.

Engineering Handbox

1. Identify variables: VL = 480, IL = 25, PF = 0.85 2. Multiply: 1.732 × 480 × 25 × 0.85 3. Result: 17,666.4 Watts

VerificationReal Power is 17.66 kW. Apparent Power is 20.78 kVA. Reactive Power is 10.95 kVAR.

Knowledge Base

Fórmula de potência trifásica?

P = √3 × V_linha × I_linha × cosφ. Para sistemas equilibrados em estrela ou triângulo.

Diferença entre estrela e triângulo?

Estrela: V_linha = √3×V_fase. Triângulo: V_linha = V_fase, I_linha = √3×I_fase.

O que é fator de potência?

FP = Potência ativa / Aparente = cosφ. FP=1,0 = carga resistiva pura. Motores: FP=0,75–0,90.

Por que trifásico é mais eficiente?

Potência instantânea constante, motores mais suaves, ~25% menos cobre.

O que é um inversor de frequência?

Converte CA para CA trifásica de frequência variável para controle de velocidade de motores.