Calculadora de Potencia Trifásica
Potencia activa, aparente y reactiva
Required Parameters
Waiting for input data...
Quick Answer
Total Real Power (W) in a balanced 3-phase system is P = √3 × Line Voltage × Line Current × Power Factor.
Calculadora de Potencia Trifasica
Calcule tension de linea, tension de fase, corriente de linea, corriente de fase y potencia en sistemas trifasicos.
Conexion Estrella (Y)
- Vlinea = sqrt(3) x Vfase
- Ilinea = Ifase
- P = sqrt(3) x Vlinea x Ilinea x cos(phi)
Conexion Triangulo (Delta)
- Vlinea = Vfase
- Ilinea = sqrt(3) x Ifase
Herramientas Relacionadas
- Calculadora de Ley de Ohm
- Calculadora de Calibre de Cable
Design Notes
Three-phase systems are standard in industrial motor drives and high-power distribution because they provide constant power transfer (zero torque ripple on motors) and require less copper wire than equivalent single-phase systems. When switching between Wye (Star) and Delta configurations, remember that in Wye, Line Current = Phase Current but Line Voltage = √3 × Phase Voltage. In Delta, it's reversed. Always ensure your power factor (PF) is as close to 1.0 as possible to minimize reactive power losses.
Common Mistakes
- 1
Using Phase Voltage instead of Line-to-Line Voltage when applying the √3 factor.
- 2
Forgetting to multiply by the Power Factor, yielding Apparent Power (VA) instead of True Power (Watts).
- 3
Assuming an unbalanced load calculation can use this simple balanced formula.
Engineering Handbox
1. Identify variables: VL = 480, IL = 25, PF = 0.85 2. Multiply: 1.732 × 480 × 25 × 0.85 3. Result: 17,666.4 Watts
Knowledge Base
¿Cuál es la fórmula de potencia trifásica?
P = √3 × V_línea × I_línea × cos(φ). Para sistemas trifásicos equilibrados en estrella o triángulo.
¿Diferencia entre estrella y triángulo?
Estrella: V_línea = √3 × V_fase. Triángulo: V_línea = V_fase, I_línea = √3 × I_fase.
¿Qué es el factor de potencia?
PF = Potencia activa / Potencia aparente = cos(φ). PF = 1.0 = carga puramente resistiva. Motores: PF = 0.75–0.90.
¿Por qué el trifásico es más eficiente?
Potencia instantánea constante, motores más suaves, ~25% menos cobre para la misma potencia.
¿Qué es un VFD?
Variador de Frecuencia: convierte AC a AC trifásico de frecuencia variable para controlar velocidad de motores. Mejora eficiencia 20–50%.