Calculadora de Constante de Tiempo
Respuesta transitoria RC y RL
Required Parameters
Waiting for input data...
Quick Answer
The time constant (τ) determines how fast an RC or RL circuit responds to a step change. RC: τ = R×C. RL: τ = L/R. After 5τ, the circuit has settled to 99.3% of its final value.
Calculadora de Constante de Tiempo
Calcule la constante de tiempo RC o RL (tau) para circuitos de carga y descarga.
Constante de Tiempo RC
tau = R x C
Despues de una constante de tiempo, el capacitor alcanza el 63,2% de su tension final. Despues de 5 tau, se considera completamente cargado (99,3%).
| Tiempo | % Cargado | % Restante |
|---|---|---|
| 1 tau | 63,2% | 36,8% |
| 2 tau | 86,5% | 13,5% |
| 3 tau | 95,0% | 5,0% |
| 4 tau | 98,2% | 1,8% |
| 5 tau | 99,3% | 0,7% |
Constante de Tiempo RL
tau = L / R
Herramientas Relacionadas
- Calculadora de Frecuencia de Corte
- Calculadora del Temporizador 555
- Calculadora de Reactancia
Design Notes
The time constant connects two fundamental domains: time response and frequency response. A circuit with τ = 1ms has a bandwidth of fc = 1/(2πτ) = 159 Hz. This means slower circuits (larger τ) filter more noise but respond more sluggishly to input changes. In digital design, minimizing parasitic RC (stray capacitance × trace resistance) is critical for achieving fast rise times: t_rise ≈ 2.2τ.
Common Mistakes
- 1
Forgetting that RL and RC time constants have opposite dependencies on R — increasing R makes RC slower but RL faster.
- 2
Assuming the circuit reaches final value after one time constant. One τ only reaches 63.2% — you need 5τ for practical completion.
- 3
Not accounting for source impedance when calculating the time constant of an RC network driven by a non-ideal source.
Engineering Handbox
1. τ = R × C = 10,000 × 47 × 10⁻⁶ = 0.47 seconds 2. Time to 95%: 3τ = 1.41 seconds 3. Time to 99.3%: 5τ = 2.35 seconds 4. Cutoff frequency: fc = 1/(2π × 0.47) = 0.339 Hz
Knowledge Base
¿Qué es una constante de tiempo (τ)?
El tiempo para que un circuito RC o RL alcance el 63.2% de su valor final. RC: τ = R × C. RL: τ = L / R.
¿Cuántas constantes de tiempo para carga completa?
1τ = 63.2%, 2τ = 86.5%, 3τ = 95%, 5τ = 99.3%. Después de 5τ se considera completamente estabilizado.
¿Cuál es la ecuación de voltaje durante la carga?
V(t) = V_final × (1 - e^(-t/τ)) para carga, V(t) = V_inicial × e^(-t/τ) para descarga.
¿Cómo se relaciona con la frecuencia de corte?
fc = 1/(2πτ). Mayor constante de tiempo = menor frecuencia de corte.
¿Por qué es importante para el antirrebote?
Los interruptores rebotan 1–10ms. Un filtro RC con τ = 5–10ms suaviza los rebotes.
Related Engineering Tools
Low Pass / High Pass Filter Calculator
-3 dB cutoff for RC and RL filters
Reactance Calculator
Inductive and capacitive reactance
Capacitor Safety Discharge Calculator
Solve discharge time or resistor value
Series and Parallel Capacitor Calculator
Equivalent capacitance from a capacitor list