インダクタンス 単位変換ツール

pH〜Hの全範囲対応

Required Parameters

Waiting for input data...

Ad Placement
Sidebar Adaptive Ad Slot

Quick Answer

1 H = 1000 mH = 1,000,000 µH = 10⁹ nH. Each prefix step is ×1000. RF inductors use nH, switching regulator inductors use µH, power inductors use mH, and transformer primaries use H.

Documentation

銈ゃ兂銉€銈偪銉炽偣 澶夋彌瑷堢畻銉勩兗銉?

銈ゃ兂銉€銈偪銉炽偣銇崢浣嶃倰澶夋彌銇椼伨銇欍€?"@ W "inductance-conversion.pt.mdx" @"

Calculadora de Conversao de Indutancia

Converta entre unidades de indutancia.

Design Notes

Inductance selection for switching regulators: L = (Vin-Vout) × Vout / (Vin × fsw × ΔIL). Higher inductance reduces ripple but slows transient response. Always check saturation current and SRF in the datasheet.

Common Mistakes

  • 1

    Forgetting that every conductor has parasitic inductance (8-10 nH per cm of PCB trace).

  • 2

    Using an inductor above its self-resonant frequency (SRF) where it behaves as a capacitor.

  • 3

    Ignoring DC bias effects — inductance drops significantly as current approaches the saturation rating.

Knowledge Base

1mHは何µH?

1,000µH。全体:1H = 1,000mH = 1,000,000µH = 10⁹nH。

各用途での使用単位は?

nH:RFインダクタ。µH:スイッチングレギュレータ。mH:オーディオクロスオーバー。H:変圧器。

寄生インダクタンスとは?

全ての導体にインダクタンスがあり、PCBパターン1cmあたり約8〜10nH。高周波で問題に。

バックコンバータの典型値は?

1〜2.2µH(MHz帯)、4.7〜22µH(100〜500kHz)、100〜470µH(低周波)。

自己共振周波数とは?

巻線間の寄生容量とインダクタンスが共振する周波数。それ以上ではコンデンサとして動作。