SMD-Kondensatorcode-Rechner
3/4-stellig und EIA-198 Markierungen
Required Parameters
Waiting for input data...
Quick Answer
SMD capacitor codes are in picofarads: the last digit is the multiplier (number of zeros). 104 = 100,000 pF = 100 nF = 0.1 µF. EIA-198 codes use a letter-digit-letter format for 1% precision parts.
SMD-Kondensatorcode-Rechner
Decodieren Sie die Markierungen auf SMD-Kondensatoren.
3-stelliges Codesystem
Die ersten zwei Ziffern sind signifikante Stellen, die dritte ist der Multiplikator.
- 104 = 100 nF
- 473 = 47 nF
- 222 = 2,2 nF
Verwandte Werkzeuge
- SMD-Widerstandscode-Rechner
- Reihen-/Parallelkondensator-Rechner
Design Notes
Most SMD ceramic capacitors (MLCCs) are unmarked. When marked, digit codes give capacitance in picofarads. The biggest practical concern is not the marking but the dielectric type: C0G/NP0 ceramics are stable but limited to small values, while X7R and X5R offer high capacitance but lose value with DC bias and temperature.
Common Mistakes
- 1
Assuming an unmarked SMD component is a capacitor — it could be a resistor, inductor, or even a diode in some packages.
- 2
Forgetting that MLCC capacitance drops significantly under DC bias (X5R 10µF at 10V may only be 3-4µF with 8V applied).
- 3
Using Y5V/Z5U dielectrics where stable capacitance is needed — their value can change by 80% with temperature.
Engineering Handbox
1. First two digits: 10 (significant figures in pF) 2. Last digit: 4 (add four zeros) 3. Raw: 10 + 0000 = 100,000 pF 4. Convert: 100,000 pF = 100 nF = 0.1 µF
Knowledge Base
In welcher Einheit ist der SMD-Kondensatorcode?
Picofarad (pF). Letzte Ziffer = Multiplikator. 104 = 10 + 0000 = 100.000 pF = 100 nF = 0,1 µF.
Was ist das EIA-198 System?
Buchstabe-Ziffer-Buchstabe für 1%-Präzision. Erster Buchstabe = Basiswert, Ziffer = Multiplikator, dritter Buchstabe = Toleranz.
Was ist der häufigste SMD-Kondensatorcode?
104 (100 nF / 0,1 µF) – der Standard-Entkopplungskondensator für praktisch jeden IC.
Warum sind meine SMD-Kondensatoren nicht beschriftet?
Die meisten MLCC-Keramikkondensatoren sind nicht beschriftet, da sie zu klein sind. Identifikation über Stückliste oder LCR-Messung.
Wie beeinflusst DC-Vorspannung den Kapazitätswert?
X7R/X5R verlieren erheblich Kapazität unter DC-Spannung. Ein 10µF-Kondensator bei 10V kann unter 8V-Last nur noch 3–4µF bieten.
Related Engineering Tools
SMD Resistor Code Calculator
3-digit, 4-digit, and EIA-96 markings
Capacitance Conversion
Unit conversion and basic capacitor code decoding
Series and Parallel Capacitor Calculator
Equivalent capacitance from a capacitor list
Resistor Color Code Calculator
Decode 4, 5, or 6 band axial resistors