Conversor de Comprimento
Unidades métricas e imperiais
Required Parameters
Waiting for input data...
Quick Answer
1 inch = 25.4 mm exactly. 1 foot = 0.3048 m. 1 mile = 1.609 km. Each conversion between metric and imperial length uses exact definitions established by international agreement in 1959.
Calculadora de Conversao de Comprimento
Converta entre unidades de comprimento.
Design Notes
PCB design commonly uses mils (thousandths of an inch) for trace width and via diameter, while board dimensions may be in mm. The exact definition (1 inch = 25.4 mm) ensures zero conversion error between systems.
Common Mistakes
- 1
Confusing mils (thousandths of an inch) with millimeters — 1 mil = 0.0254 mm, not 1 mm.
- 2
Forgetting that yards and meters are close but NOT equal: 1 yard = 0.9144 m (about 9% shorter).
- 3
Using different precision than the measurement justifies — a ruler measurement to 1 mm does not justify 6 decimal places after conversion.
Knowledge Base
Quantos mm em uma polegada?
Exatamente 25,4 mm. Padrão internacional desde 1959.
O que é um mil?
1 mil = 0,001 polegada = 0,0254 mm. Usado para trilhas de PCB e tolerâncias de usinagem.
Quantos pés em um metro?
1 metro = 3,28084 pés. 1 pé = 0,3048 m.
Unidades para dimensões de PCB?
Misto: tamanho em mm, largura de trilha em mil ou mm, passo de componentes em mm.
Que precisão usar?
Combine com a precisão da entrada. Régua a 1mm → máximo 3 algarismos significativos.